Welcome to the Bolens BL110 manual, your comprehensive guide to understanding and operating the 2-cycle curved shaft string trimmer․ This manual covers safety, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your trimmer․

1․1 Overview of the Bolens BL110 Trimmer

The Bolens BL110 is a 2-cycle curved shaft string trimmer designed for efficient grass and weed trimming․ It features a reliable engine, lightweight design, and adjustable cutting width for versatility․ Suitable for medium-duty tasks, it combines power and maneuverability, making it ideal for maintaining lawns and gardens․ The curved shaft provides precise control, while the single-line head ensures clean cuts․ This trimmer is built for durability and ease of use, catering to both homeowners and professionals․

1․2 Importance of Reading the Manual

Reading the Bolens BL110 manual is crucial for safe and effective operation․ It provides essential safety symbols, operating instructions, and maintenance tips to prevent accidents and ensure longevity․ Understanding the guidelines helps avoid hazards and warranty voidance․ Failure to follow instructions can lead to serious injury or equipment damage․ Refer to the manual for proper oil mix, assembly, and troubleshooting․ For assistance, contact support at 1-800-800-7310 (U․S․) or 1-800-668-1238 (Canada)․

Safety Precautions and Warnings

Always follow safety symbols and instructions to avoid injury․ Wear protective gear, and ensure proper oil usage․ Refer to specific sections for detailed safety guidelines and precautions․

2․1 Safety Symbols and Their Meanings

The manual uses specific safety symbols to alert users of potential hazards․ These symbols, such as warning labels and pictographs, indicate critical safety precautions․ Understanding their meanings is essential for safe operation․ Common symbols include warnings for rotating parts, hot surfaces, and flammable materials․ Always refer to the manual’s safety section for detailed explanations of these symbols to ensure proper handling and operation of the trimmer․

2․2 General Safety Rules for Operation

Always wear protective gear, including gloves, safety glasses, and long pants, when operating the trimmer․ Ensure the area is clear of bystanders and obstacles․ Maintain a firm grip and proper stance to control the unit․ Avoid operating in wet conditions or near open flames․ Keep children and pets away․ Never touch hot or moving parts, and follow all warnings and instructions provided in the manual to ensure safe and effective use of the trimmer;

2․3 Protective Equipment Recommendations

Wear safety glasses or goggles to protect your eyes from debris․ Use gloves to maintain a secure grip and prevent blisters․ Long pants and sturdy footwear are recommended to safeguard against cutting debris․ A face mask can reduce dust inhalation․ Ensure all clothing is snug-fitting to avoid entanglement with moving parts․ Proper protective equipment minimizes risks and ensures safe operation of the Bolens BL110 trimmer․

Assembly and Initial Setup

This section guides you through unpacking, inventorying parts, and assembling your Bolens BL110 trimmer․ Follow the step-by-step instructions to ensure proper setup for safe and effective operation․

3․1 Unpacking and Inventory of Parts

Begin by carefully unpacking the Bolens BL110 trimmer and its accessories․ Ensure all components, including the trimmer head, shaft, handle, and cutting line spool, are present․ Refer to the parts diagram in the manual to verify the completeness of your inventory․ Check for any damage or missing items․ This step is crucial for ensuring proper assembly and functionality․ For assistance, contact customer support at 1-800-800-7310 (U․S․) or 1-800-668-1238 (Canada)․

3․2 Step-by-Step Assembly Instructions

Begin by attaching the handle to the shaft using the provided bolts․ Align the handle with the shaft and tighten securely․ Next, connect the cutting head to the shaft, ensuring it clicks into place․ Wind the cutting line around the spool, leaving a small portion exposed․ Replace the spool cover and ensure it is properly seated․ Refer to the manual for detailed diagrams and tighten all parts firmly before use to ensure safe and efficient operation․

3․3 Attaching the Trimming Line

To attach the trimming line, remove the spool cover and wind the line around the spool in the direction indicated․ Cut the line to the recommended length using the guide on the spool․ Insert the line ends into the eyelets on the cutting head and replace the spool cover․ Ensure the line is properly seated and not tangled․ Refer to the manual for specific winding instructions to ensure optimal performance and safe operation․

Operating Instructions

This section guides you through starting the engine, proper handling, and line adjustment for safe, effective, and efficient trimming every time․

4․1 Starting the Engine

To start the engine, pull the starter rope 3-5 times until resistance is felt․ Allow the unit to warm up for 30-60 seconds before use․ Ensure the trimmer line is properly secured and the unit is on a level surface․ Always refer to the manual for specific instructions to avoid damage or injury․

4․2 Holding and Maneuvering the Trimmer

Stand in the operating position with your feet shoulder-width apart․ Hold the trimmer firmly with both hands, one on the handle and the other near the cutting head․ Maintain proper balance and control to maneuver effectively․ Keep the trimmer at a slight angle to maintain cutting efficiency․ Adjust your stance as needed for comfort and accessibility to different cutting areas․

4․3 Adjusting the Trimming Line

To adjust the trimming line, first, remove the spool or cutting head by pulling it straight off․ Cut the line to the recommended length (10-15 feet) and wind it neatly around the spool․ Secure the end to prevent unraveling․ Reattach the spool, ensuring it clicks into place․ Test the line by trimming a small area to ensure proper feeding and cutting performance․ Adjust as needed for optimal results․

Maintenance and Care

Regular maintenance ensures optimal performance․ Clean the trimmer after each use, lubricate moving parts, and inspect for wear․ Address issues promptly to extend lifespan․

5․1 Cleaning the Trimmer

Regular cleaning is essential for maintaining the Bolens BL110 trimmer’s efficiency and longevity․ Use a soft brush or cloth to remove dirt and debris from the exterior, paying attention to the air filter and cutting line․ Clean the air filter regularly and inspect the cutting line for damage․ For tougher dirt, use compressed air on the filter and a damp cloth on the engine․ This prevents debris buildup and ensures optimal performance․

5․2 Lubrication and Oil Requirements

Proper lubrication is crucial for the Bolens BL110 trimmer’s engine longevity․ Use a high-quality 2-cycle oil mixed at a 40:1 ratio with gasoline․ Refer to the manual for specific oil recommendations․ Regularly check the oil level and top it off as needed․ Using the wrong oil type or mixture can lead to engine damage․ Always follow the guidelines provided in the manual to ensure optimal performance and prevent premature wear of internal components․

5․3 Regular Inspection of Parts

Regular inspection of the Bolens BL110 trimmer’s parts is essential for maintaining performance and safety․ Check the trimming line for wear and damage, ensuring it is properly tensioned․ Inspect the air filter for cleanliness and the spark plug for proper function․ Examine the shaft and cutting head for any signs of damage or misalignment․ Addressing these issues promptly helps prevent breakdowns and ensures reliable operation․ Refer to the manual for recommended inspection intervals and procedures․

Troubleshooting Common Issues

This chapter helps identify and resolve common Bolens BL110 issues․ Address problems promptly to prevent damage․ Check engine, line feeding, and vibrations for fixes․

6․1 Engine Not Starting

If the engine fails to start, check the fuel and oil mixture․ Ensure the choke is properly engaged and the spark plug is clean․ Verify the fuel tank is not empty and the cap is secure․ Prime the engine by pulling the starter rope 3-5 times․ If issues persist, inspect for blockages in the air filter or fuel line․ Consult the manual for detailed diagnostic steps to resolve the issue effectively․

6․2 Trimming Line Not Feeding Properly

If the trimming line isn’t feeding, check for tangles or knots in the line․ Ensure the line is properly installed and not too long․ Inspect the spool for debris or damage․ Replace the line if it’s worn or uneven․ Refer to the manual for correct installation procedures․ If issues persist, clean the spool and reassemble carefully․ Proper alignment and tension are crucial for smooth operation․ Always use the recommended line type and size for optimal performance․

6․3 Vibration or Unusual Noise

If vibrations or unusual noises occur, inspect the trimmer head for loose parts or debris․ Ensure the cutting line is evenly worn and properly tensioned․ Check the engine for misalignment or damaged components․ Excessive vibration may indicate an unbalanced rotor or worn-out bearings․ Refer to the manual for proper maintenance procedures․ Regular lubrication of moving parts and timely replacement of worn components can prevent such issues․ Always follow the manufacturer’s guidelines for optimal performance and safety․

Parts Diagram and Replacement

Refer to the parts diagram to identify components․ Replace worn or damaged parts with genuine replacements․ Follow the manual’s guidelines for correct installation and maintenance․

7․1 Identifying Parts Using the Diagram

The parts diagram provides a detailed visual representation of the Bolens BL110 trimmer․ Each component is labeled with a specific part number and description․ Use the diagram to locate and identify parts such as the engine, shaft, cutting head, and other accessories․ Cross-reference the part numbers with the manual or manufacturer’s website to ensure accuracy․ This helps in ordering the correct replacement parts and understanding their assembly․ Always verify part numbers before purchasing to avoid errors․

7․2 Ordering Replacement Parts

To order replacement parts for your Bolens BL110, refer to the parts diagram in the manual or visit the manufacturer’s website․ Use the specific part numbers and descriptions provided in the diagram to ensure accuracy․ Contact the MTD customer support team at 1-800-800-7310 for assistance․ Parts can also be purchased from authorized dealers or online retailers․ Always verify part numbers before placing an order to ensure compatibility and avoid errors․

7․3 Installing New Parts

When installing new parts on your Bolens BL110, always refer to the parts diagram for accurate placement․ Ensure the trimmer is turned off and allow the engine to cool․ Use genuine MTD parts to maintain performance and warranty validity․ Follow the step-by-step instructions in the manual for specific installation procedures․ If unsure, consult the troubleshooting section or contact customer support at 1-800-800-7310 for clarification․ Proper installation ensures safety and optimal functionality․

Environmental and Warranty Information

This section covers EPA and CARB compliance, warranty details, and proper disposal of old parts․ It ensures eco-friendly operation and outlines warranty coverage for the Bolens BL110 trimmer․

8․1 EPA and CARB Compliance

The Bolens BL110 trimmer is designed to meet EPA (Environmental Protection Agency) and CARB (California Air Resources Board) emissions standards․ These regulations ensure the engine operates with reduced emissions, contributing to a cleaner environment․ Compliance with these standards guarantees the trimmer is eco-friendly and adheres to strict air quality requirements․ Always refer to the manual for specific details on emissions and environmental performance․

8․2 Warranty Details and Coverage

The Bolens BL110 trimmer is backed by a comprehensive warranty program․ The warranty covers manufacturing defects in materials and workmanship for a specified period․ For detailed terms, review the warranty section in the manual․ Coverage includes repairs or replacements for defective parts, ensuring your trimmer performs reliably․ Refer to form numbers like 769-16491 or 769-15651 for specific warranty details and conditions․ Contact customer support at 1-800-800-7310 for assistance with warranty claims or inquiries․

8․3 Proper Disposal of Old Parts

Proper disposal of old parts ensures environmental protection․ Dispose of worn-out components responsibly, adhering to local regulations․ Check with local waste management facilities for guidelines on recycling or hazardous waste disposal․ Separate recyclable materials and ensure harmful substances are handled appropriately․ Eco-friendly disposal helps preserve the environment and complies with EPA and CARB standards outlined in the manual․ Always follow community-specific instructions for safe and responsible waste management․

Frequently Asked Questions

This section addresses common inquiries about the Bolens BL110, such as oil mixing ratios, string replacement, and storage tips, to help users maintain and operate their trimmer effectively․

9․1 How to Mix Oil for the Engine

To maintain your Bolens BL110 trimmer, use a 40:1 fuel-to-oil ratio․ Mix 3․2 ounces of 2-cycle oil with one gallon of gasoline․ Avoid using 4-cycle oil or mixing with other oils, as this can damage the engine․ Always use fresh, high-quality oil and gasoline for optimal performance․ Refer to the manual for specific oil recommendations and mixing guidelines to ensure proper engine function and longevity․

9․2 How to Change the Trimming Line

Turn off the engine and let it cool․ Remove the spool by pulling it straight off․ Cut a new 10-foot section of 0․080-inch trimming line․ Wind the line clockwise around the spool, leaving 6 inches unwound․ Secure the end in the spool notch․ Reattach the spool and ensure the line feeds properly․ Always use the recommended line diameter for optimal performance and to avoid engine issues․

9․3 How to Store the Trimmer

Drain the fuel tank to prevent stale gas․ Clean the trimmer thoroughly, removing dirt and debris․ Store in a dry, secure location away from direct sunlight and moisture․ Ensure the area is well-ventilated and out of reach of children․ Check for any damage or wear before storage and address it promptly․ Proper storage ensures the trimmer remains in good condition and ready for future use․

10․1 Final Tips for Effective Use

• Always read the manual thoroughly before operating the trimmer․
• Use the correct oil-to-gas ratio for optimal engine performance․
• Regularly inspect and replace worn or damaged parts․
• Keep the trimming line at the recommended length for efficiency․
• Store the trimmer in a dry, secure location after use․
• Refer to the troubleshooting section for common issues․
• Wear protective gear during operation for safety․

By following these tips, you’ll ensure safe and effective use of your Bolens BL110 trimmer․

10․2 Contact Information for Support

For any questions or assistance, contact Bolens support at 1-800-800-7310 (U․S․) or 1-800-668-1238 (Canada)․ Refer to the manual for additional resources or visit the official website for detailed guidance and support options․