The Fluke 87 manual is a comprehensive guide detailing operating, maintenance, and safety procedures. Available as a PDF, it’s user-friendly and covers essential multimeter functions, ensuring accurate measurements and safe usage for professionals and DIYers alike;
1.1 Overview of the Fluke 87 Multimeter
The Fluke 87 True RMS Multimeter is a versatile, handheld device designed for precision measurements in various environments. With a 4000-count display, it offers high accuracy for both field and laboratory use. True RMS technology ensures accurate readings for non-sinusoidal waveforms. The multimeter features advanced functions like a frequency counter, duty cycle measurement, and an Input Alert for detecting incorrect connections. Its rugged design and compliance with safety standards (EN61010.1, ANSI/ISA S82.01) make it reliable for industrial applications. The Fluke 87 is widely regarded for its durability, ease of use, and comprehensive measurement capabilities, making it a trusted tool for professionals and DIY enthusiasts alike.
1.2 Importance of the Manual for Users
The Fluke 87 manual is crucial for users to maximize the multimeter’s functionality and ensure safe operation. It provides detailed instructions for installation, setup, and usage, helping users understand advanced features like true RMS measurements and frequency counting. The manual also outlines safety precautions and compliance standards, such as EN61010.1 and ANSI/ISA S82.01, to prevent accidents. By following the guidelines, users can maintain the device’s accuracy and longevity. The manual serves as a reference for troubleshooting common issues and accessing technical specifications. Whether for professionals or novices, the Fluke 87 manual is an essential resource to unlock the full potential of the multimeter while ensuring reliability and performance in various applications.
Safety Information and Precautions
The Fluke 87 manual emphasizes compliance with EN61010.1 and ANSI/ISA S82.01 standards, highlighting precautions for handling static-sensitive devices and ensuring safe multimeter usage in various environments.
2.1 Safety Compliance Standards (EN61010.1, ANSI/ISA S82.01)
The Fluke 87 multimeter adheres to international safety standards, including EN61010;1 and ANSI/ISA S82.01, ensuring protection against electrical hazards. These standards guarantee safe operation and compliance with regulatory requirements, making the device reliable for industrial and laboratory use. Compliance with these standards is verified through rigorous testing, ensuring the multimeter’s safety features meet global benchmarks. Users are assured of enhanced protection against electrical risks, aligning with industry best practices. This adherence to safety standards underscores Fluke’s commitment to delivering durable and secure measurement tools.
2.2 Handling Static-Sensitive Devices
Static discharge can damage sensitive components in the Fluke 87 multimeter. To prevent damage, ensure proper grounding by wearing an anti-static wrist strap or touching a grounded metal object before handling the device. Use conductive work surfaces and avoid working in dry environments. Keep the multimeter in its protective case when not in use. Static-sensitive parts include the input terminals and internal circuitry. Failure to follow these precautions may result in irreversible damage. Always handle the device with care, as static discharge is a common cause of malfunctions. Refer to the manual for detailed static handling procedures to maintain the integrity and functionality of your Fluke 87 multimeter.
2.3 General Safety Guidelines for Multimeter Usage
Always read the safety information section before using the Fluke 87 multimeter. Avoid measuring voltages exceeding the multimeter’s rated capacity to prevent damage or injury. Use the correct probe tips and ensure they are securely connected to avoid accidental short circuits. Never touch live circuits with bare hands or while standing on conductive surfaces. Regularly inspect the multimeter and probes for damage or wear. Ensure the multimeter is set to the correct range before taking measurements. Avoid exposing the device to extreme temperatures, humidity, or physical stress. Store the multimeter in its protective case when not in use to maintain its accuracy and longevity. Follow these guidelines to ensure safe and accurate measurements with your Fluke 87 multimeter.
Product Overview and Design
The Fluke 87 True RMS Multimeter is a durable, handheld device designed for field, lab, and home use. Featuring a 4000-count display, it combines precision with robust construction, ensuring reliable measurements in demanding environments. Its user-friendly interface and advanced capabilities make it ideal for professionals and enthusiasts alike, offering a blend of accuracy, reliability, and ease of use.
3.1 Key Features of the Fluke 87 Multimeter
The Fluke 87 True RMS Multimeter stands out with its advanced features, including true RMS measurements for accurate voltage and current readings. It offers a high-resolution 4000-count display, providing precise data for both AC and DC signals. The multimeter is designed for versatility, supporting various measurement functions such as voltage, current, resistance, capacitance, and frequency. Its built-in frequency counter and duty cycle measurement capabilities enhance its utility in industrial and field applications. Additionally, the Fluke 87 is equipped with a unique Input Alert feature that sounds a beeper if input is detected, ensuring user safety. Its rugged design withstands drops up to 4 meters, making it highly durable for demanding work environments. These features make the Fluke 87 a reliable choice for professionals requiring accurate and durable measurement solutions.
3.2 Physical Specifications and Build Quality
The Fluke 87 multimeter is built with exceptional durability, featuring a rugged, industrial-strength case designed to withstand harsh environments. It weighs approximately 340 grams, making it portable while maintaining a robust structure. The device is shock-resistant, capable of withstanding drops up to 4 meters (13 feet), ensuring reliability in demanding conditions. The multimeter also comes with a removable holster for convenient storage and protection. Its physical design adheres to stringent safety standards, including IEC 61010-1, ensuring user protection during measurements. The high-quality materials and precise engineering contribute to its long-lasting performance. These physical specifications make the Fluke 87 a dependable tool for professionals working in field, laboratory, or industrial settings, where durability and accuracy are paramount.
User Manual Details
The Fluke 87 manual provides detailed installation, setup, and operating instructions. It covers basic and advanced measurement techniques, troubleshooting, and maintenance tips, ensuring optimal use of the multimeter.
4.1 Installation and Setup Instructions
The Fluke 87 manual outlines clear installation and setup steps. Begin by unpacking and inspecting the multimeter for damage. Next, familiarize yourself with the input terminals and ensure all accessories, such as test leads, are securely connected. Power on the device and verify the display shows zero to confirm proper functionality. For advanced features, refer to the calibration section to ensure accuracy. Finally, review safety guidelines to prevent damage from static discharge or incorrect usage. Detailed diagrams and troubleshooting tips are provided to assist with any issues during the setup process. Proper installation ensures reliable performance and longevity of the multimeter.
4.2 Basic Operating Instructions
Begin by powering on the Fluke 87 multimeter and allowing it to complete the self-test. Select the desired measurement mode using the function dial, choosing from voltage, current, resistance, or frequency. For voltage and current measurements, ensure the test leads are connected to the correct input terminals. Use the range button to adjust the measurement range if necessary. The multimeter features auto-ranging, but manual adjustment can improve accuracy. For resistance measurements, touch the probes to the circuit points and wait for a stable reading. Always refer to the safety guidelines to avoid damage or injury. The multimeter’s true RMS capability ensures accurate measurements for both sinusoidal and non-sinusoidal waveforms. Store the device in a protective case when not in use to maintain its condition.
4.3 Advanced Measurement Techniques
The Fluke 87 multimeter supports advanced measurement techniques for precise analysis. Use the true RMS function for accurate voltage and current readings, especially with non-sinusoidal waveforms. The frequency counter mode measures duty cycle, displaying values between 0.1% and 99.9%. For stability, enable the hold function to freeze readings. Utilize the input alert feature for beeper notifications when invalid inputs are detected. The multimeter also allows for dual-display readings, showing primary and secondary measurements simultaneously. For detailed analysis, access the min/max recording function to capture fluctuating values. Refer to the manual for configuring these settings. Advanced users can leverage these features for troubleshooting complex electrical systems efficiently. Ensure proper setup and adjustment of settings for accurate results in industrial or laboratory environments.
4.4 Troubleshooting Common Issues
Identify and resolve common issues with the Fluke 87 multimeter by following these troubleshooting steps. Check for loose or corroded connections, as they can cause inaccurate readings. Ensure the battery is fully charged or replace it if necessary. If the display is unclear, adjust the contrast or replace the LCD backlight. For calibration errors, refer to the calibration manual and perform the procedure using approved tools. Static discharge can damage components, so follow proper handling practices. If the multimeter fails to power on, verify the fuse integrity or test with an external power source. Reset the device to factory settings if advanced functions malfunction. Consult the user manual for detailed solutions or contact Fluke support for further assistance. Regular maintenance ensures optimal performance and accuracy in measurements.
Service and Calibration Manual
The Fluke 87 Service and Calibration Manual provides detailed procedures for maintenance, calibration, and repair. Follow authorized guidelines to ensure accuracy and safety in measurements and operations.
5.1 Maintenance and Service Procedures
Regular maintenance ensures the Fluke 87 multimeter operates accurately. Clean the exterior with a soft cloth and avoid harsh chemicals. Replace batteries promptly to prevent leakage damage. For internal servicing, refer to the Service Manual, which details procedures for calibration, circuit board inspection, and component replacement. Static-sensitive components require grounding before handling. Use an anti-static wrist strap or mat to prevent damage. The manual also outlines diagnostic tests to verify functionality post-servicing. For complex repairs, contact authorized Fluke service centers. Proper maintenance extends the meter’s lifespan and ensures reliable measurements. Always follow the guidelines to maintain warranty validity and operational safety.
5.2 Calibration Requirements and Procedures
Calibration of the Fluke 87 multimeter is crucial for accuracy. The process involves adjusting internal circuits to ensure precise measurements. Users can perform basic calibration using the built-in procedure outlined in the Calibration Manual. This includes setting the multimeter to specific modes and adjusting zero points. For advanced calibration, specialized software and equipment are required, as detailed in the manual. Regular calibration intervals depend on usage, typically every 12 months. Always use Fluke-approved calibration tools to maintain certification. Refer to the Service Manual for step-by-step instructions and safety precautions. Proper calibration ensures compliance with industry standards and reliable performance in field and lab environments. Follow all guidelines to maintain accuracy and extend the meter’s operational life.
5.3 Repair and Replacement of Parts
Repairing or replacing parts in the Fluke 87 multimeter requires careful adherence to the Service Manual. Common parts needing replacement include fuses, input connectors, and battery compartments. Always use genuine Fluke components to ensure performance and safety. Before starting, disconnect power and ground the device to prevent static discharge. Detailed diagrams in the manual guide disassembly and reassembly. For complex repairs, Fluke recommends contacting authorized service centers. Replacement parts can be ordered directly from Fluke’s website or authorized distributors. Regular maintenance and prompt repairs extend the meter’s lifespan and maintain calibration accuracy. Refer to the Service Manual for specific instructions and warranty information to avoid voiding the guarantee.
Technical Specifications
The Fluke 87 features true RMS measurements, high accuracy, and a rugged design. It offers a 4000-count display, robust drop resistance, and reliable performance for industrial and field use.
6.1 Electrical Specifications
The Fluke 87 multimeter offers precise electrical measurements with true RMS capabilities. It accurately measures AC/DC voltage up to 1000V, current up to 10A, and resistance up to 50MΩ. The meter also features frequency and capacitance measurement modes, making it versatile for various electrical tasks. With a high-resolution 4000-count display, it ensures readability and accuracy. The Fluke 87 is designed to handle non-sinusoidal waveforms, providing accurate readings for crest factors up to 3. Its robust design and compliance with safety standards like EN61010.1 make it suitable for industrial and field applications, ensuring reliable performance in demanding environments. This multimeter is a trusted tool for professionals requiring precise electrical measurements.
6.2 Environmental and Physical Specifications
The Fluke 87 multimeter is built to withstand challenging environments, operating effectively in temperatures from -40°C to 65°C and up to 95% relative humidity. Its rugged design ensures durability, withstanding drops up to 4 meters. The multimeter weighs approximately 0.7 kg and measures 225 x 102 x 52 mm, making it portable for field use. The LCD display is backlit for visibility in low-light conditions. The meter is also vibration-resistant, adhering to MIL-PRF-28800 standards. Its CAT III 1000V and CAT IV 600V safety ratings ensure safe operation in industrial settings. The Fluke 87 is designed for reliability in harsh conditions, making it suitable for both laboratory and field applications. These specifications highlight its robustness and versatility for professional use.
Additional Resources
Access warranty information, software updates, and Frequently Asked Questions (FAQs) on the official Fluke website. Additional support and service options are also available for optimal multimeter performance.
7.1 Warranty Information
The Fluke 87 multimeter is backed by a 3-year limited warranty, ensuring protection against defects in material and workmanship. This warranty period begins from the date of purchase. To maintain warranty validity, users must adhere to proper usage guidelines outlined in the manual. The warranty does not cover damage resulting from misuse, accidents, or unauthorized repairs. For warranty claims, customers should contact Fluke support directly via phone or through the official website. Additionally, registering the product online can streamline warranty-related processes. Always retain the purchase receipt and documentation for verification purposes. Fluke’s commitment to quality ensures reliable performance of the 87V multimeter under normal operating conditions.
7.2 Software Updates and Support
Fluke offers dedicated support and regular software updates to enhance the functionality of the 87 multimeter. Users can access the latest firmware and software tools through the Fluke Connect platform, ensuring optimal performance. The Fluke website provides a dedicated section for downloading updates, which can be installed via USB or other compatible interfaces. Additionally, the Fluke Connect app allows wireless connectivity, enabling data logging and analysis on smartphones or tablets. Technical support is available through various channels, including phone, email, and online resources. For troubleshooting, the manual and online FAQs offer detailed solutions. By leveraging these resources, users can maximize their multimeter’s capabilities and stay updated with the latest features and improvements.
7.3 Frequently Asked Questions (FAQs)
The Fluke 87 manual includes a detailed FAQ section addressing common user inquiries. Topics range from troubleshooting to safety guidelines and calibration. Users often ask about accurate measurement techniques, handling static-sensitive devices, and interpreting error codes. The FAQs also cover software updates, warranty details, and compatibility with other Fluke accessories. For instance, questions about troubleshooting common issues like inaccurate readings or connectivity problems are clearly explained. Additionally, the section provides insights into safety guidelines and calibration procedures. Users can also find FAQs on the Fluke website or through customer support. These resources ensure users can resolve issues quickly and make the most of their multimeter’s features, enhancing overall productivity and measurement accuracy.